Skip to end of metadata
Go to start of metadata


This guide walks through the steps to create, build and test an Windows background service module using Studio. The equivalent CLI instructions are given in the information boxes near the top of each section.

Windows Module prerequisites

As of Titanium 9.0.0, building Windows apps is no longer supported.

Support for Windows 8.1 and Windows Phone SDKs has been deprecated as of SDK 6.3.0.GA and has be removed in SDK 7.0.0.GA.

To develop an Windows-based Module, you'll need all of the software required to build a Titanium application for Windows:

  • Titanium SDK
  • Supported versions of Visual Studio and the Windows Phone SDK, as described in Installing the Windows Phone SDK
  • Studio or the Appcelerator Command-Line Interface (CLI) for creating modules, and building and running test applications

Like Windows application development, Windows module development is only supported on Windows.

Create a new module

First, create a new module project.

CLI Instructions


 From a terminal, change the current working directory to your workspace and run:

In Studio:

  1. From the menu, select File > New > Mobile Module Project to open the New Mobile Module Project dialog.
  2. In the Project name field, enter test.
  3. In the Module Id field, enter com.example.test.
  4. In Deployment Targets, select Windows.
  5. Click Next, then click Finish.

Studio sets up a new folder called test that contains your module project.

Build and package the module

Next, build the module and package it. This process produces a ZIP file containing a binary library with unprocessed module assets, example code and documentation.

CLI Instructions


From a terminal, go to the module's windows directory and run the appc run -p windows --build-only

After the build completes, unzip the built module in the Titanium SDK home path: (C:\ProgramData\Titanium).

In Studio:

  1. Select your module folder in the Project Explorer view.
  2. Verify Package and Windows Module are displayed in Launch Mode and Launch Target, respectively.
  3. Click the Package icon to open the Package Windows Module dialog.
  4. In Output Location, choose the Titanium SDK to install the module in the Titanium SDK home path to be accessed by any Titanium application.
  5. Click Finish.

Studio builds and installs the module to the Titanium SDK home path.

Test the module

To test the module, create a test application and add the module as a dependency of the project.  Then, load the module and make module API calls to the module reference.

Create a test application

CLI Instructions


From a new terminal window, change the current working directory to your workspace and run the following commands:

In Studio:

  1. From the menu, select File > New > Mobile App Project to open the New Mobile App Project dialog.
  2. On the Project Template page, select Default Alloy Project as the template type, then click Next.
  3. On the Project Location page, enter the following information:
    • In the Project Name field, enter Hello.
    • In the App ID field, enter com.example.hello.
    • In Deployment Targets, select Windows.
  4. Click Finish to create the project. 

Studio sets up a new folder called Hello that contains the test application you will be using to test the module.

Add the module as a dependency to the project

To load the module in the application, you need to add it as a dependency to the project.

CLI Instructions


Open the tiapp.xml and update the <modules/> element to include the module as a dependency to the project. In addition to that Windows background module requires Extension element with EntryPoint specified. In EntryPoint you need to specify a background service class name, which is named "camel-cased module identifier" plus "BackgroundServiceTask". In this example since we uses "com.example.test" as an module id, background task entry point goes to "ComExampleTest.BackgroundServiceTask".

Load the module and make module API calls

Open the app.js file and replace the code with the following, which invokes background service API calls to the module. In this example we use registerTimerTask to register Windows::ApplicationModel::Background::TimeTrigger which is invoked for each 15 minutes interval.


Run the application

CLI Instructions


From a terminal that has the test app as its current working directory, run:

In the Studio toolbar, select Run in Launch Modes and select an Windows Phone simulator in Launch Targets.

Studio builds and launches the application on the select Windows Phone simulator.  Monitor the Console view for log output.

The console lines seen below show us that the module is working as expected.


Modify the module

Let's modify the module code to create a view object and access a string property.

First, look at some of the default files created by the Titanium SDK.  Expand the windows folder.  Inside this folder are two files:

  • src/ComExampleTest.cpp: This is a boilerplate Module class. Every module requires a module class, which acts as the base API for the module.
  • include/ComExampleTest.hpp: This is a header file for the boiler plate class.

Implement background task

In ComExampleTestModule.cpp file you'll find BackgroundServiceTask class inside namespace ComExampleTest.


BackgroundServiceTask implements Windows Background Service IBackgroundTask interface so you can implement a task that works in the background. The implementation for background task should be inside BackgroundServiceTask::Run function:


Let's implement something useful here: let say we want a number to count how many times background task is executed. Important thing you need to know here is that BackgroundServiceTask doesn't have a state because background task is executed and finished on each invocation. So you need a way to save a state: in this case we can use ApplicationData::Current->LocalSettings or local file storage to store values. In this example let's use LocalSettings for now:


In this example we saves count value to "ComExampleTest.BackgroundServiceTask.count" local setting. Good new is that you can actually get the value from JavaScript using Ti.App.Properties with same key "ComExampleTest.BackgroundServiceTask.count". Because we save the state in the local settings, count value is still saved even when app is finished or even all background tasks are unregistered.


Next steps

  • No labels